Connecting your Wallbox charger to ev.energy for Smart Charging is a straightforward process. Follow these steps to get started:

‍

1. Enable OCPP Settings

• To point your charger to ev.energy, you need to enable OCPP settings. This can be done through the charger's configurations.

‍

2. Access OCPP Settings

• Open the Wallbox app and navigate to the 'Configurations' section. Look for the OCPP settings located at the bottom right. If you can't see or select this option, refer to the "Issues connecting to network after connecting OCPP?" section for assistance.

‍

‍

3. Select OCPP

• ‍‍Tap on "OCPP" to proceed with configuring the settings.

‍

‍

4. Enter the following Information:

• ‍URL: `wss://ocpp.ev.energy`
• ‍CPID: Serial Number of Charger (around 6 digits)
• Password: Leave this blank
• Accept Terms and Conditions: Read through and accept the Terms and Conditions presented.

‍

5. Save Settings

• ‍‍Hit "Save" to apply the changes.

After saving, the LEDs of the unit should flash white, indicating it's in pairing mode. The app will display "OCPP Connecting." Once paired successfully, you'll see your charger details, and it should indicate "OCPP Connected."

‍

‍

Troubleshooting

• If pairing fails or if the status remains stuck in "OCPP Connecting," double-check the entered details. If everything appears correct and the issue persists, contact ev.energy for further assistance.
• Please ensure your charger firmware version is at least 6.1.X. To confirm this, go to configuration settings and select "Charger Info."

‍

By following these steps, you'll seamlessly connect your Wallbox charger to ev.energy, unlocking advanced energy management features. If you encounter any difficulties or have questions, feel free to reach out to our support team. Happy charging!